So you went out and bought one of these fancy new database scanner like the HomePatrol, BCD436/536 or a Whistler TRX and set it up. The problem though is that you are not hearing your local channel that you expected. There are a couple things to try. The first is to double check that you have the location and Service Types set properly. If these are correct, did you accidentally lockout (“Avoid”) the Channel, Department or System?
If you have ruled out these issues take a look at the RadioReference Database at RadioReference.com. This is where the frequency information comes from. If the channel is listed there but not included in your radio then you need to update the database on your radio. Make sure you have installed Sentinel (Uniden) or EZ-Scan (Whistler) and run the update procedure for these scanners. After updating the database make sure you copy (“Write”) it to your radio and try it again.
If you find that the channel is not listed in the RadioReference database then you will have to do some detective work. If you know what the frequency or talkgroup is then be sure to submit it to RadioReference so it can be added or corrected in the database. All you need is a RadioReference user name and password, either a free or paid membership will work. In the meantime it can be added to a Favorites List or Scanlist via the software.
If you do not know what the channel’s frequency or talkgroup is then you will need to do a little more work. If you know they use a trunking system then create a Favorites List and set it to Trunked Search (if on a Uniden). If you have a Whistler then create a ScanList with that system and add a Wildcard to it. This allows you to listen to all activity on the system and when you hear the traffic you want make sure you note the talkgroup number for future reference. You can submit that talkgroup number to RadioReference to update the database and also add it directly to the Favorites List or ScanList with the appropriate name.
On conventional (non-trunked) systems you can do a couple things. First off, check the FCC license for the agency you want to listen to. Most of the time you can do this from the RadioReference database page, just click on the call sign. Since the RadioReference Database only contains information that is verified a new channel might be listed on the license but not included in the main database since no one has reported it as verified yet.
If the channel you seek is not listed there, check licenses for nearby communities, the local County or a regional dispatch center. The actual license might be held by another agency that does dispatch for your town.
Still cannot find it? Now it is time to get serious! Your scanner has a “Search” function. Learn how to set up a Limit Search. Check the most common scanner bands used in your area and set up a search for that band. Lockout the channels as you hear them if they are not your local agency, checking the RadioReference Database as you find them.
Regardless of how you find them be sure to share the knowledge. Submit your finds to the RadioReference Database system so that others in your area can listen in and so that future versions of the database include it. Remember that the database is updated weekly, usually Sunday or Monday. Submissions might take a little while to get processed however so wait to the following week after you receive the notification that your submission has been worked.
