Tag Archives: BCD996P2

GPS Based Scanning Tips

Posted on by

Several Uniden scanners support GPS based scanning. There are two main ways this works; Database based and Programming Based.

Scanners that support ZIP Code based programming (The HomePatrol and x36 types) can support GPS in both ways. Scanners that do not have the ZIP Code feature only support Programming based GPS.

ZIP Code based GPS scanning allows the radio to reload itself with the local frequencies based on locations provided by the attached GPS receiver. Instead of pulling over to change the ZIP code every once in awhile the GPS receiver sends the location to the scanner and it will update the location on a regular basis and reload the channels for that area.

Since these use the RadioReference database to provide the information, the GPS centers and ranges are set in the database and included when you update the scanner’s database in Sentinel.

Programming based GPS scanning requires that the Systems, Sites and Groups (or Favorites Lists) be programmed with GPS coordinates and ranges. The GPS sends the location to the radio and when the radio determines that you are within the circle drawn based on the location and range it turns on that item. When you leave the circle it turns it off.

If you use your scanner over a wide area a GPS can allow you to automatically turn on and off systems, sites, groups and/or Favorites Lists automatically and without having to punch in a ZIP Code all the time. If you only use the scanner at home or around a small area a GPS wouldn’t help you but if you travel a lot (RV folk, truckers etc.) it can be invaluable.

Most people use the Uniden GPS receiver with their scanners. It works on all Bearcat GPS-aware scanners without needing to configure it. If you want to use another GPS it has to support the older Serial format and the baud rate settings must be set to match that of the scanner. Most GPS receivers these days (Garmin, TomTom etc.) do not support Serial mode so you will likely be better off with the Uniden GPS.

Scanners that support GPS Scanning:

How to connect the Uniden Bearcat GPS Receiver to the Uniden Bearcat BCD325P2 and the SDS100 Scanner with the optional cable.

Software UPDATE: ARCXT Software V.2.1 Build 3

Posted on by

BuTel ARCXT Software update is now available
Download here ARCXT Basic / ARCXT PRO

BuTelChanges in 2.1 build 3:

  • added support for DMR/Mototrbo systems
  • added talk group filters to RR import
  • added service type filters to RR import
  • fixed error message in RR import
  • add print group quick keys option
  • added Color code settings to DL/DPL

DMR/ProVoice firmware update information 

Note:
Owners of the BCD325P2 and BCD996P2 must update the scanner firmware in order to use the new ARCXT update.  This is only for P2 models and does not effect XT models.

BCD325P2 Firmware Updates
BCD996P2 Firmware Updates

Uniden Location Based scanner hints

Posted on by

Uniden’s line of Location Based scanners allow one to enter their location (usually by ZIP Code) to load local channels without needing to know frequencies, systems, talkgroups and other technobabble. There are a couple things to remember and a couple byproducts that can make life your scanner easier. These scanners include the HomePatrol 1 & 2, as well as the BCD436HP and BCD536HP.

First the good stuff! Did you know that you do not need the scanner itself to do most updates, including firmware? That’s right! If the radio is mounted in the car (especially for the BCD536HP) just remove the memory card and connect it to your computer using a card reader. Since these are “Mini SD-Cards” you will need a card reader that will read them or one that works with standard SD Cards and a Mini SD-Card adapter. Just plug the SD card into the card reader and then the reader into the computer and run Sentinel just like you would if the radio was plugged in. (When doing the Extreme, DMR or ProVoice Updates you must do them on the radio itself as the code is installed from the keypad.)

SD Card readers are inexpensive and some computers have SD-Card readers built in. Remember that the Mini SD-Card requires the Full-Size adapter since most computer slots and card readers do not accommodate the Mini SD-Card directly. While Uniden doesn’t supply the adapter card with the radios they are easy to find and come with Mini SD-Cards you buy in the store. This leads us to the next part:

Get a spare card!

Why have just one SD-Card for your scanner when you can have several? SD-Cards are cheap these days. You can buy spare or replacement cards anywhere (including ScannerMaster) and keep them in case you have difficulties. One problem with SD-Card based scanners is that the cards can be corrupted if the power is removed while the radio is on. Since the radio has to write some closing data to the card, one must turn the radio off before removing power or the batteries. Sometimes a voltage spike could cause this as well.

With a spare programmed SD-Card you can be ready if you have a problem. I have found that having a spare seems to prevent the need for it; the only time I corrupted a card was when I was on the road with no computer. I have since always carried a programmed spare card and never had a corruption issue. Coincidence? I think not!

Update your radio.

Using a card-reader to update the SD-Card in your Uniden Location Based scanner is simple, you can update the firmware, database and Favorites Lists directly on the card itself, plug the card in and the radio will automatically be updated. When you do this the radio’s firmware will be updated the first time you power the radio up with the new or reprogrammed card. The database and any enabled favorites lists will then load.

On the 536 you can just pop the card in and out from the front panel. Be sure to turn the radio off first! On HomePatrol and 436 radios the card is behind the batteries, so to access it remove the batteries, On the 436 slide the small metal retaining clip over and remove the card. To replace the card slide it into the clip, fold it down and slide the clip over again. On the HomePatrol the care pops in a slot, gently press it in a tiny bit to release it. When replacing the card carefully pop it into the slot until it clicks in.

Buy a new card from ScannerMaster!

When we do our Setup and Optimize on a scanner most customers would send the radio in to us, we do the updates etc. and then ship the radio back to the customer. We soon figured out that it would be easier and cheaper for the customer to buy a replacement card, have the card programmed and delivered. This way an expensive radio isn’t being shipped across the country twice, risking damage or loss. You get a new SD-Card, of a type faster and more reliable than that supplied with the radio. If your old card still works then you already have a spare. You save up to 10 days of transit time, don’t have to pay expensive shipping fees. Mailing an SD-Card costs less than $2.00, shipping a radio costs $15-25 each way. We also include the Full-Size adapter!

You can also create SD-Cards yourself with Sentinel. Remember that you need to use the “Clear User Data” menu item on a new card to format it for use on your Uniden radio.

Whistler SD-Card based scanners can be updated to a lesser extent, the DSP and firmware updates must be done thru the radio itself. The mobile Whistler scanners (WS-1095, WS-1098 and TRX-2) come with a full-size SD Card, the portable Whistler scanners use Mini SD Cards. Mini SD-Cards can be used in the mobile radios with the full-size adapter.