One of our favorite scanners of the past is the Bearcat 760XLT and its siblings. This was a desktop-mobile scanner family introduced in the late 1990’s. Built in a fairly small package, it fit almost anywhere.
This was one of a series of scanners in the same style case sold under the Bearcat, Regency and Cobra nameplates. Other models, like the BC950XLT, BC580XLT, BC590XLT and others shared the same case style. The 950 and 760 versions handle 800 MHz, the others do not. They were all analog-only and did not have trunktacking capabilities.
There were two optional boards for these radios. One was an internal pre-amp that could amplify the signal strength. While this was not available on the 760 and 950 versions (an 800 MHz. converter was installed in the same slot on these) an external preamp was available for these.
The most interesting thing with these scanners however was the introduction of a PL board. This was the first scanner to have the PL function, a revolutionary thing back in 1998! A pair of switches on the bottom of the radio under the bail controlled these options.
These scanners came in 2 generations. The first had an older style Motorola antenna jack and the newer ones changed to a BNC. The newer versions also allowed one to use the PL on some channels and not others while on the older ones the PL board was either on or off for the whole radio.
These radios were quite sensitive and were well known as great “Skip” receivers on low-band. They were also quite popular as the core of specialty devices like wireless mic receivers in mobile video systems, the radio portion of fire station alerting receivers and other uses due to the low cost, high sensitivity and a design that made it easy to adapt for these uses.
They were replaced by the famous BC780XLT but there are still many of these around.
