Basic Troubleshooting – How to fix a silent scanner

So your fancy scanner no longer works. Is it the scanner itself or did your local agencies move to new channels? Today we will discuss ways to find out.

The first thing I tell callers when they say their scanner is dead is to try the local weather channels. Almost everyone is in range of one of the National Weather Service radio stations on 162.400 thru 162.550. If you try each of the 7 channels (listed below) and nothing is heard then there may well be something wrong with the radio. If you have another scanner or weather radio handy try that one. If the other radio works then there is likely something wrong with the first radio.

Here are the weather frequencies that you can check to see if your scanner is working properly:

  • 162.4000
  • 162.4250
  • 162.4500
  • 162.4750
  • 162.5000
  • 162.5250
  • 162.5500

If the weather channel works on your scanner then we should look to programming. If the radio worked before but no longer hears the local police, fire or other agencies you used to listen to then they may have changed frequencies. Several states have recently updated their wide-area radio systems, if you live in Ohio, Indiana or South Carolina there is a great possibility that this is what occurred. Alternately, some agencies have switched to existing regional radio systems such as these states or those in Illinois, Missouri, Wisconsin, Michigan Colorado, Louisiana and Mississippi among others.

The best thing to do is check the RadioReference.com database and forums. If you recently lost your target there is likely someone else who has also. I had a caller the other day from northern Arizona say his police department disappeared, he listened to them over the weekend and then on Monday they were gone. We found that they had just switched to a new P25 digital system. While it was not yet listed in the RadioReference database it was being discussed in the RadioReference forums for Arizona.

If all this fails and you cannot find the target anywhere by searches with the scanner there are still a couple more tricks. Remember that public safety communications systems are expensive. They don’t go out and buy them on a whim. Purchases of that size usually must be approved by the local boards, City Council, County Supervisors etc. Look at these board’s websites for meeting minutes and agenda items. This is all public information and most places these days post them to the web. You can sometimes find all kinds of interesting information on the systems, sometimes even complete technical details, frequencies and talkgroup information get put up there!

Check with your local officers and administrators. While often they might not be technically savvy they might know that “we switched to the County system” or something. Also look for the type of radio they are carrying or have installed in the vehicle. That can sometimes point to the radio system type they are using.

Once you find out what system they are using and the frequencies etc. reprogram or replace your scanner to match.

HP1 vs .HP2

The Uniden BearCat HomePatrol was a revolutionary design that transformed the scanner hobby when it was introduced. Never before was there a scanner that allowed one to just put in a ZIP Code to replace individual channel programming. The success of the HomePatrol led directly to the BCD436HP and the BCD536HP as well as location based scanners from Whistler (GRE and RS).

A couple years ago the HomePatrol line was extended with the introduction of the HomePatrol 2, the original HomePatrol is now called the HomePatrol 1.

So what is the difference between the HomePatrol 1 and 2? Well there are a few differences. The biggie of course is that the HP-2 handles APCO P25 Phase 1 and Phase 2 while the HP-1 only does Phase 1. If your area doesn’t use Phase 2 you could save some money and get the HP-1. The HP-1 has a silver front panel while the HP-2 is black.

In addition the HP-2 (like most other current handheld scanners) chargesits batteries from the USB port instead of using a separate jack like the HP-1. This allows the HP-2 to use common USB chargers of which you probably already have a bunch of. Since it uses common USB chargers it doesn’t come with one. If you are that one guy who doesn’t have a USB charger available we do sell them.

Other than the charger and Phase 2 the HP-1 and HP-2 are almost identical. The same software is used to update and program either radio. You can even take a memory card from one radio and use it in another. If you are using mounting gear the same gear can be used for either radio.

HomePatrol 2:

 

HomePatrol 1:

Hosting a stream

One of the most popular ways to listen to the local scanner action these days is via a live-streaming service over the Internet. By far the largest source for this is Broadcastify.Com. While this is a great place to listen, it is dependent on someone hosting a scanner for the area you want to listen to. If no one does you can do it yourself. Here is what you need to set up your own feed:

Step 1:    Make sure there is no feed already covering the traffic you wish to stream. If there already is one look at the noted for that feed and see if there is something different that you will do.

Step 2:    If you are not already a RadioReference or Broadcastify member (with user name and password) set up an account. You can set up a free account, paid accounts offer great benefits but are not needed to host a feed. If you are already a member skip this and go to Step 3.

Step 3:    Go to the Broadcastify site and submit a Feed application. They need your information, the channels you plan to stream and some other details. Once you submit your application it takes a few days (usually) for a response, and if approved they provide a code that is entered in your feed software to enable it.

Step 4:    Set up the hardware. This is the computer that you are going to use and the radio itself. You will need an audio cable to connect the computer and radio. If you are using a Uniden scanner you can also connect a USB or serial cable so allow channel tags to be sent along with the radio traffic. See below for the best scanners to be used for feeds.

Step 5:    Set up the software. The software is free from Broadcastify, you can download it there. It is pretty simple to install and set up, print out the instructions that come with it and follow them. If you follow them correctly it will work great!

Step 6:    Adjust the levels. Once your feed is live listen to it and make sure the audio levels are set properly. If the channels you set up are not very active try programming in the local weather channel for a few minutes to use to set the levels properly. Once you have the levels set where they sound best be sure to note the settings in case you need to move something later. Don’t forget to get rid of the weather channel!

What is the best radio for a feed? Well, it is the radio you have that will listen to the traffic you want to stream. Remember, once you commit to hosting a stream that radio must be dedicated to that stream 24/7.

If the radio you use does not have a record jack then you need to set the volume and leave it where it is. Be sure to mark the level with a dab of White-Out in case it gets moved.

For feeds the Uniden BCD15X (analog) and BCD996P2 (digital) are favored by many streamers since they are reasonably priced and have a record jack on the back. The Record jack is ideal for feeds, as the sound level is not affected by the volume control. You set the sound level with the computer’s sound controls and you can use the scanner volume to allow you to listen to the scanner locally without affecting the feed volume. They also support sending channel tags so the listener can see the channel names.

Streaming hints and tricks:

No one likes to hear static, noise etc. Make sure you monitor your stream to be sure that it doesn’t lock up on noise or interference. Make sure the audio levels are good and that the feed sounds good.

How many channels can I stream? The best answer is less is more. If you have a lot of channels or a bunch of real busy ones then the scanner is going to be busy all the time and some channels are going to be missed. Some really busy feeds (like Chicago PD) have just a single channel that is active almost continuously.

What kinds of channels can I stream? These rules are listed in the Terms of Service for the streaming service. Broadcastify has rules against certain tactical or sensitive traffic. Make sure none of the channels you have include the prohibited traffic.

Can I stream 2 radios at the same time? Yes! Set up one radio to the left channel and the other to the right. Possible scenarios are police on one and fire on the other. Make sure you note this in the feed description!

What do I do if the agency doesn’t want me to stream them? Well, that is up to you. Streaming is legal and the agency cannot force you to stop streaming their traffic. They can however add encryption, then it will not be able to be heard at all by anyone.

Broadcastify has a complete set of rules and procedures on it’s page at Broadcastify.com. If you use a different service be sure to read their rules before setting up your feed.

All those weird ports on the back of the scanner

Modern scanners have a plethora of various ports, jacks and sockets on them. Here is a look at some of them.

Taking a look at the rear panel of the BCD536HP scanner there are 6 different ports on it. From left to right they are:

  • BNC antenna jack
  • External Speaker Jack
  • USB Port (used for WiFi unit only on the 536)
  • GPS Serial Port
  • 3-pin power port
  • Coaxial power port

Other common ports on scanners include:

  • USB programming port
  • Record jack
  • Headphone jack
  • Various serial ports.

Let’s look at each port and what it is used for: (*Bonus! See below for an explanation of the weird hole smack in the middle…)

Antenna Jack:  Of course this is used to connect an antenna to the radio. Most scanners these days use BNC, the little push and turn job you see in the picture. Some handled scanners use the smaller SMA connector. Some older scanners had Motorola or even SO139 connectors and some had both an external connector and an internal threaded connector with a hole in the case to insert it.

External Speaker:  These are used to plug in an external speaker and are different than headphone jacks. Speaker Jacks do not limit the volume like a headphone jack will. When you plug in a speaker into the external speaker jack the inside speaker is disconnected.

Headphone Jack:  The Headphone jack has a limiting circuit to protect from overly loud sound that can damage your hearing. Otherwise it works much like the external speaker jack. Headphone jacks are usually in the front panel of desktop scanners while speaker jacks are usually on the rear. Handheld scanners usually just have a headphone jack on the top.

Record Jack:  The Record Jack allows one to pull audio from the scanner at a constant level that is not affected by the volume control. This is important when the radio is used as a source for recording or streaming. Some older RadioShack scanners and some current Uniden scanners have record jacks.

GPS Serial Port:  Unique to Uniden scanners, the DB-9 Serial port (male) is used mostly to connect a GPS receiver to allow location based scanning. It can also be used to program or control the scanner with the properly constructed cables. Do not confuse this with the female DB-9 port used for programming on older scanners like the BC780XLT or the BC898T

USB Programming port:  Most scanners these days use a USB-Mini port on the front or side to program and control the scanner. On many handheld scanners these ports are also used to charge the batteries and power the radio. On the BCD325P2 a special cable is used to connect a GPS to this port.

Other serial ports:  Some older scanners use different type serial ports. Older Unidens (like the “XT” series) use a unique 4-pin square connector for programming and connection of the RH-96 remote head. HP-1 and HP-2 scanners use that same port style for connecting to a GPS. Older design RadioShack/GRE/Whistler scanners use a jack that is just like a headphone jack for serial port connections.

Coaxial Power Port:  Most desktop/mobile scanners have a coaxial power port to provide 12 VDC to the scanner. There are 2 different jacks in common use. The majority of Uniden mobile and desktop scanners use a “Type M” male jack while most recent RadioShack, GRE and Whistler mobiles use a “Type T” female jack. Both use center-pin positive. Some older handheld scanners use smaller coaxial power ports but newer portable scanners usually use the USB port for charging and external power.

3-pin power port:  This is another unique to Uniden port, similar to the power port used on some of their CB products. On Uniden scanners there are the regular black and red wires for power and a third orange wire used to control the brightness of the display when connected to the lighting circuits of the car.

Discriminator Jack:  This is probably the most popular jack that doesn’t come on scanners. Discriminator audio is used to provide an unfiltered audio source mostly for data decoding. This type of decoding usually does not work from the record or speaker jacks due to the filtering circuitry in the radio. Scanners usually do not come with jacks for this but it is often added on by advanced scanner hobbyists to allow data decoding.

 

Bonus Round

See that threaded hole smack in the middle of the back panel in the picture at the top of the page? Most Uniden base/mobile scanners have that. It is used to allow a rear bracket to stabilize the radio under the dashboard. It is not mentioned in the owner’s manuals but is shown in the diagrams.

FRS/GMRS/MURS/CB: The Personal Radio Services

Anyone can use one of several types of two-way radios, most of which do not require a license. From something the kids can play with to serious business uses there are a bunch of different types of varying quality and usefulness. These are called CB, FRS, MURS and GMRS. Only GMRS requires a license, the others do not. Each of the four services have different intended functions.

  • FRS: Family Radio Service (low power, short range, intended for families and individuals)
  • GMRS: General Mobile Radio Service (high power, longer range, intended for families)
  • MURS: Multiple Use Radio Service (mid-power, medium range, intended for business)
  • CB: Citizen’s Band Radio Service (low power mobile)

You ever go into Wal-Mart or Best Buy and see those cheap little two-way radios encased in one of the most devious inventions of man-kind (Bubble Packs)? They boast wild range figures (“35 mile Range!”) and are made by many different companies like Motorola, Midland and Cobra. These are called “FRS Radios” (Family Radio Service). FRS radios are restricted to ½ watt, non-removable antennas and are intended for short-range person-to-person communications. While titled as the Family Radio Service they are commonly used by businesses and government organizations. In my neighborhood I hear construction crews, hunters, the local school and the golf course maintainers on FRS channels. Just about everything but families… There are few restrictions on what you can use it for so business and personal communications are allowed.

FRS is actually pretty interesting to listen to in many cases. While a lot of the traffic is inane nonsense, like kids wearing out the noisemaking alert beep button, occasionally there is some interesting stuff to listen to. I live in a fairly isolated area 20 miles from the nearest town. There is construction going on and the crews use several FRS channels to coordinate activities. There is a school in the area that uses FRS radios too. The golf course guys use FRS when performing maintenance or to corral loose duffers. Local landscapers use FRS as well.

Listening to FRS channels at the mall or around amusement parks etc. can also be fun. The stores and shops often use FRS radios for clerks and stockers, customers use them to keep in touch with their family.

A lot of the FRS channels are shared with GMRS, so listening to one set of frequencies you may hear both services.

GMRS is a little different than FRS. Since a license is required and power levels are higher they tend to be used in a more formal matter. FRS also allows repeaters so you may hear traffic from all over the area. GMRS is often used by REACT and other volunteers as well as family businesses and often for just idle chit-chat and radio clubs. Sometimes it sounds a lot like ham radio.

MURS can be very interesting. It is on VHF and allows higher power than FRS but in many other aspects it is very similar. Like FRS there are few restrictions on what you can use it for. Since the radios tend to be a little more expensive MURS channels tend to be more business oriented.

CB these days is mostly a wasteland of unintelligible noise. It is still popular with the highway crowd but between high-power illegal amplifiers, over-driven power echo-mics and other noisemakers it is no longer a viable communications tool. It can be interesting to listen to however!

If you put these frequencies in your scanner you may find some interesting communications. You might also be bored silly but you won’t know until you try it.

General Mobile Radio Service (GMRS)

  • Freq (MHz)              Remarks                  
  • 462.5500                 Repeater Output/Simplex    (Repeats 467.5500)
  • 462.5750                 Repeater Output/Simplex    (Repeats 467.5750)
  • 462.6000                 Repeater Output/Simplex    (Repeats 467.6000)
  • 462.6250                 Repeater Output/Simplex    (Repeats 467.6250)
  • 462.6500                 Repeater Output/Simplex    (Repeats 467.6500)
  • 462.6750                 Repeater Output/Simplex    (Repeats 467.6750)
  • 462.7000                 Repeater Output/Simplex    (Repeats 467.7000)
  • 462.7250                 Repeater Output/Simplex    (Repeats 467.7250)
  • 462.5625                 Simplex (5 watts)
  • 462.5875                 Simplex (5 watts)
  • 462.6125                 Simplex (5 watts)
  • 462.6375                 Simplex (5 watts)
  • 462.6625                 Simplex (5 watts)
  • 462.6875                 Simplex (5 watts)
  • 462.7125                 Simplex (5 watts)

Family Radio Service (FRS)

  • Freq (MHz)              Ch #         
  • 462.5625                 1
  • 462.5875                 2
  • 462.6125                 3
  • 462.6375                 4
  • 462.6625                 5
  • 462.6875                 6
  • 462.7125                 7
  • 467.5625                 8
  • 467.5875                 9
  • 467.6125                 10
  • 467.6375                 11
  • 467.6625                 12
  • 467.6875                 13
  • 467.7125                 14
  • 462.5500                 15 (Shared with GMRS)
  • 462.5750                 16 (Shared with GMRS)
  • 462.6000                 17 (Shared with GMRS)
  • 462.6250                 18 (Shared with GMRS)
  • 462.6500                 19 (Shared with GMRS)
  • 462.6750                 20 (Shared with GMRS)
  • 462.7000                 21 (Shared with GMRS)
  • 462.7250                 22 (Shared with GMRS)

Multiple Use Radio Service (MURS)

  • Freq (MHz)                                                 
  • 151.8200
  • 151.8800
  • 151.9400
  • 154.5700
  • 154.6000

Citizens Band (CB)           

  • Freq         Ch #          Freq         Ch #         
  • 26.965    1                27.215    21
  • 26.975    2                27.225    22
  • 26.985    3                27.255    23
  • 27.005    4                27.235    24
  • 27.015    5                27.245    25
  • 27.025    6                27.265    26
  • 27.035    7                27.275    27
  • 27.055    8                27.285    28
  • 27.065    9                27.295    29
  • 27.075    10             27.305    30
  • 27.085    11             27.315    31
  • 27.105    12             27.325    32
  • 27.115    13             27.335    33
  • 27.125    14             27.345    34
  • 27.135    15             27.355    35
  • 27.155    16             27.365    36
  • 27.165    17             27.375    37
  • 27.175    18             27.385    38
  • 27.185    19             27.395    39
  • 27.205    20             27.405    40

Welcome to the Scanner Master Blog Site

Hello. We’re pleased to introduce the Scanner Master web blog service today at Scannermaster.com. The purpose of the blog is to provide a forum for Scanner Master staff and colleagues to provide interesting and informative scanner news and tips to our customers and friends. Over time these blogs will also serve as an information resource that our customers will be able to use to research such topics such as, “Ways to Improve Scanner Reception Indoors,” and other interesting articles. We’ll also let you know about new products that are soon to be released and events and trade shows that Scanner Master will be attending.

We also invite you to submit your ideas for topics and your scanner questions that you would like answered. And of course at anytime we’d love to hear from you with your comments on our blog and our our site. Thank you very much.

Richard Barnett
May 2009