DMR, ProVoice and Ultimate Self Updating

Posted on July 5, 2017 by Rich Carlson

Most people who want the various paid updates for Uniden scanners (DMR, ProVoice or Ultimate Updates) have our staff add the updates to the radios when they buy it. It is simpler and worth the little bit of added expense for a lot of these folks.

There are times when it is not convenient for one to have us do these updates at the time of purchase. Maybe you bought the radio elsewhere (shame on you!) or didn’t know you needed the update until later. Perhaps the target you want to listen to changed to a new system.

You can send the radio to us using the regular Mail In Programming Order Form and have us do the update for you. We can do the updates with or without the programming services.

If you cannot send the radio to us for the updates you can get them directly from Uniden.com. If you live outside the USA or Canada however then Uniden cannot process your credit card for payment. We can!

The first thing you MUST do is to update the firmware to the latest version. On each radio except the 996 and 325P2 it is done thru Sentinel. For users of the 325 and 996P2 you download it from Uniden’s website and run the updater.

After you update the firmware call us and provide the below information and we will then email you with the one-time code to unlock the feature set on your radio.

Model (HomePatrol 1, Home Patrol 2, BCD436HP, BCD536HP, BCD325P2, BCD996P2)

Electronic Serial Number (Not the one on the label!)

HP1, HP2: Press Menu>Advanced, scroll down then press Version Information

All others: Press Menu>Settings>See Scanner Info> Firmware Version

Sum Code (HP1 and HP2 it is the 3 digits right of the dash after the ESN)

Of course will need your email address to send you the code as well as the proper billing address and credit card information.

Once you get the code from us go to the Update menu on the radio and enter it via the keypad. Once the code is entered it remains on the radio forever, you cannot erase it or transfer it to another radio. On the 325, 996, 436 and 536 scanners you can have either or both of the DMR and ProVoice updates. The HP1 and HP2 only support the Ultimate Update.

If you have questions on these updates you can call our scanner experts at 1-800-SCANNER.

Update the firmware on your scanner!

Posted on June 14, 2017 by Rich Carlson

Why would you want to update the firmware on your scanner, and how do you do it?
First, let’s explain WHAT firmware is. Firmware is the operating system of your radio, it works behind the scenes and tells the radio how to deal with things like keyboard inputs, frequencies, etc. Just like your computer or phone has an operating system (Like Windows 10, iOS etc.) scanners do too. Remember, scanners these days are miniature computers; they work much in the same way.

Firmware updates are released for a couple reasons. They either fix a problem or add/change features. Sometimes they do both. As an example, the BCD436HP’s most recent firmware update added the ability to add ProVoice and DMR digital protocols, before that firmware updates addressed an issue with clock settings.

When updating firmware one must follow ALL instructions CAREFULLY! You have the possibility of “bricking” your radio if you don’t do it right. This means that your $500 scanner may now be more useful as a brick than a radio… Follow the provided instructions to the letter and make sure that the program and firmware file you use is intended for your radio. The firmware for the PRO106 will not work on the WS1040!

Before trying to update the firmware on your radio make sure you have properly downloaded the firmware file itself as well as the installation program (if needed) BEFORE you start. If you do not have a replacement firmware file to install do not start the process since this erases the existing firmware to make the radio ready for the new version. No new version means no radio once you get going.

Some radios firmware updates are easier than others. The HomePatrol type radios use a program called Sentinel to check for new firmware versions and install them (easy, safe). Other Uniden scanners use a “Bearcat Version Updater” program to install a new update. GRE/RadioShack/Whistler scanners also use an application to install new firmware versions (nerve-wracking maybe).

What they all have in common is that they require a computer running Windows to update. (You can do it with a Mac running Windows with Parallels, Fusion, Bootcamp etc.) You also need the appropriate cable to connect from your computer to the radio. This is usually done via USB but some older radios use a Serial port.

Before updating your firmware make sure you have the following on hand:
• The radio you want to update
• The proper cable for your radio, along with the drivers already installed (if needed)
• The Firmware Updating program appropriate for your radio
• The actual firmware file itself (Imperative!)
• A strong sedative or plenty of alcohol to calm your nerves (optional)

Follow the instructions included with the firmware update TO THE LETTER. Make sure your radio and the computer can communicate properly. If you have programming software for your radio then read it first and save the programming file just in case you need to restore it to the radio. This also ensures that the radio and computer can communicate.

We also suggest that you check the RadioReference forum for your radio to see what other people’s experiences have been. Reading about someone else’s mistake is a lot easier than trying to fix your own.

Owners of PRO651 and PRO652 scanners that had tried to update their radios’ firmware versions had issues since no firmware updates were available until recently. Now one can download them and install them so previously bricked radios can be reincarnated.

ScannerMaster can update the firmware on many different models of scanners. Download the Hometown Programming Form for your radio and check the Firmware Update option if you would prefer our expert programmers to do this for you. We keep them heavily sedated all of the time already so their nerves are steady. Firmware Updates for “Zip Code Scanners” (HomePatrol, 436/536 and the TRX/WS1080/1088/1095/1098 series scanners) is included with the Setup and Optimize package already, it is an extra cost option for other scanners. If you aren’t sure call us and we will let you know.

DMR, ProVoice and Ultimate Updates for Uniden Scanners.

Posted on June 7, 2017 by Rich Carlson

ScannerMaster offers a service to install the various paid updates for Uniden HomePatrol, x36 and P2 series scanners. These updates include the HomePatrol Ultimate Update (for HomePatrol 1 and 2 scanners) as well as the ProVoice and DMR/TRBO updates for the BCD436HP, BCD536HP, BCD996P2 and BCD325P2 scanners.

If you buy one of these scanners from ScannerMaster we offer a service to install these options for you before we ship the scanner. You can also send the scanner to us to perform the update, we then send the radio back to you.

Sometimes however it is not practical to send the radio to us. For US and Canadian customers it is pretty simple to buy the update directly from Uniden and install it yourself. For customers in other countries however it is a different story. Uniden can only accept credit cards from US and Canadian addresses. If you live in other countries then Uniden cannot accept your credit card for payment for these updates. They will refer you to a third party like ScannerMaster to obtain your updates.

ScannerMaster can accept credit cards from most countries. As long as the card works on our payment system we can provide you with the secret code to unlock the update for your radio. There are a couple things you will need to do to make this all work out:

First you need to update the FIRMWARE for your scanner. This is so important that if you don’t do it the paid updates just will not work! On the HomePatrol and x36 scanners it is done thru the Sentinel software, on the 325 and 996P2 radios it is done thru a separate (free) program available from Uniden’s website.

Once you have done the Firmware Updates then you need to obtain the “ESN” (Electronic Serial Number” from your scanner along with the “SUM” code. Here are the procedures for this:

HomePatrol-1 and HomePatrol-2:

Press Menu
Press Advanced Menu
Press the down arrow to get to the second page of items
Press the Version Information Button.

The ESN is listed and starts with 36 for the HP-1 and 37 for the HP-2. The SUM Code is the last 3 digits past the second dash. The ESN will look something like 36327-0040012345-123, the SUM code is the “123” part.

BCD436HP, BCD536HP, BCD325Ps and BCD996P2:

Press Menu
Select Settings.
(If you do NOT see “Upgrade” as an item in the list go back and update the firmware and start over!)
Select See Scanner Information
Select Firmware Version
The ESN will be listed as “SN37……”
The SUM Code will be a 3-digit letter/number combination.
We need both the ESN and the SUM Code. Don’t worry about the M-VER code.

We need the complete ESN and the SUM Code as well as the model of radio you have. With this info we can obtain the one-time code that unlocks the feature you want and send that code to you. You then go to the Upgrade menu on your scanner and enter it using the rotary knob to select the numbers. Once the code is properly added the radio will think it over for a minute or so and then announce that it was successful.

Once properly updated the code will stay working on the radio and will not need to be reinstalled. The code will only work for the radio it was obtained and if you dispose of the radio there is no way to transfer the code or feature to another radio.

Firmware, Firmware, who needs Firmware?

Posted on April 15, 2016 by Rich Carlson

OK, you have this whiz-bang multi-hundred dollar scanner sitting there and you want to make it much more better! You read about Firmware Updates but haven’t a clue what this means. Should you update the firmware on your scanner? If so how do I do it? What does it all mean? What is the meaning of all this? Can you do this for me?

First, let’s explain WHAT firmware is. Firmware is the operating system of your radio, it works behind the scenes and tells the radio how to deal with things like keyboard inputs, frequencies, etc. Just like your computer or phone has an operating system (Like Windows 10, iOS etc..) scanners do too. Remember, scanners these days are miniature computers, they work much in the same way.

Firmware updates are released for a couple reasons. They either fix a problem or add/change features. Sometimes they do both. As an example, the BCD436HP’s most recent firmware update added the ability to add ProVoice digital, the version before that addressed an issue with clock settings.

What they all have in common is that they require a computer running Windows to update. You can use also a Mac as long as you are running Windows on it (with Bootcamp, Parallels, Fusion etc.). You also need the appropriate cable to connect from your computer to the radio. This is usually done via USB but some older radios use a Serial port.

Before updating your firmware make sure you have the following on hand:

The radio you want to update
The proper cable for your radio, along with the drivers already installed (if needed)
The Firmware Updating program appropriate for your radio
The actual firmware file itself
A strong sedative or plenty of alcohol to calm your nerves (optional)

We also suggest that you check the RadioReference forum for your radio to see what other peoples experiences have been. Reading about someone else’s mistake is a lot easier than trying to fix your own.

ScannerMaster can update the firmware on many different models of scanners. Download the Hometown Programming Form for your radio and check the Firmware Update option if you would prefer our expert programmers to do this for you. We keep them heavily sedated all of the time already so their nerves are steady. Firmware Updates for “Zip Code Scanners” (HomePatrol, 436/536 and the WS1080/1088/1095/1098 series scanners) is included with the Setup and Optimize package already, it is an extra cost option for other scanners. If you aren’t sure call us and we will let you know.

AOR DV1 Firmware Alert

Posted on July 15, 2015 by Rich Carlson

The AOR DV1 has another new firmware update (v1507f) available at http://www.aorusa.com/support/firmware.html.

Below are the updates included in this release. Future releases will address other issues. Please contact AOR directly at http://www.aorusa.com/ with questions and suggestions.

The installation instructions are fairly simple, copy the firmware file to the SD Card, turn the radio on and press a couple keys. The instructions are included with the file.

Following features have been implemented:

* Backup to and restore from SD card

Following bugs have been removed:
* Fixed “auto-store” bug when SEARCH is running.
* S-Meter indicator stayed sometimes on even though power was off.
* When the file 99999999.wav was present in the SD card, the next recording was mistakenly named 10000000.wav. Now the recording after 99999999.wav is made impossible.
* Priority receive was not always functioning.
* Could not go out of settings screen after priority receive activation.
* Receiver would not restart properly if the function key was pressed before switching the receiver off.
* Invalid characters on LCD when time settings accessed during memory receive.
* Incorrect memory channel content switch when priority mode was activated during memory scan
* When erasing a search bank the LCD froze on “writing” indication.
* Memory bank editing was not possible during SCAN.
* Erasing search bank 39 in search group settings was impossible.
* Auto-store function: If memory bank 39 was full, channels 46 to 49 were not kept in memory after a reboot.
* Invalid characters on screen when “writing” was displayed.

FUNCTIONS AND BEHAVIOR CHANGES:
* When SEARCH is stopped and the [ENT] key pressed, the currently received frequency and settings are copied to VFO-Z.
* VOL/SQL maximum value changed from 100 to 99.
* (PC remote control through Hyperterminal commands). When receiver is turned off with the QP command and USB cable disconnected, the next time the receiver is turned on through the front panel, it will start in a “non-remote control” state.

Firmware Alert – AOR AR-DV1

Posted on June 5, 2015 by Jonathan Higgins

AR DV1 firmware update: v1505G, 6-5-2015

AOR has uploaded revised firmware for the AR-DV1 receiver. While this update will correct issues that some customers experienced, it also adds more functionality to the AR-DV1. AOR is committed to the continuous improvement of its products and will post firmware updates periodically to further extend the capabilities of this receiver.

The new firmware version: 1505G is now available for download from the AOR website.
Directions: AR-DV1 Firmware Update Procedures

This firmware will correct:

Malfunctions with the backlit keys lighting up while the power switch is in the “off” position
D-STAR signals overriding the selected mode for received data. The decode mode will now decode and display only the selected mode.
Malfunctions with the receive frequency when CTCSS or DCS is selected during Search mode.
Problems with pressing LOCK key or MONI key when frequency entry is made from the keypad
Issues with the display data freezing when digital data is displayed while using the keypad or rotating the dial knob.
Issues with the opening message displaying properly.
Memory channel registration problems. Entering the memory tag followed by pressing DOWN key will now work properly.
Voice squelch function stability
SAL/SAL or USBL/LSB operational issues
D-CR code setting error
Analog FM mode function
Initial power-up cycle
Problems with “motorboating” noise in DMR mode
Problems adding receive mode, IF B/W, CTCSS/DCS in memory scan mode and program search mode.

New enhancements for the AR-DV1 available with this firmware include:

Ability to open the squelch while in digital mode by pressing MONI key
Ability to save the current receiver settings by pressing [F]+[VOL]
Easier frequency entry during search bank setting by using the [.] (decimal) key for frequencies below 1MHz.
In memory mode or program search mode, receiver options can be added.
SD card FAT16 is now supported
Remote ID can be added to last channel memory
The AR-DV1 will send a message showing connection status during on/off process.
Step frequency can now be set during search or scan mode
The following PC commands are now supported: MD ZJ ZK SQ NQ LQ VQ ZP QP EX AG RF ST SH DT BP LN LB LD KL PT ZI LC LM RX LT RT RE SB WI RN VR
AC RG IF LS NR OF OL OX SC SI DL FR CI CN DI DS DC DJ DK
(A complete list of new functions will be posted soon.)

Firmware Alert – GRE PSR-800

Posted on October 16, 2012 by Jonathan Higgins

By Jonathan Higgins

Product: GRE PSR-800
Firmware Update: U 1.7

What included in the update?

This experimental beta CPU software adds APCO Project 25 Phase 2 functionality to the PSR-800 and must only be used in conjunction with the companion beta DSP version U1.2 included in this upgrade.
More details

How to update your GRE PSR-800?

Download Firmware File
Connect your PSR-800 to your PC via the Programming cable/Power Cable.
Follow detailed (PDF File) instructions on how to update your PSR-800

Firmware Alert – Uniden HomePatrol-1 [2.03.01]

Posted on July 20, 2012 by Jonathan Higgins

By Jonathan Higgins

Product: Uniden HomePatrol-1 (HP-1)
Firmware Update: 2.03.01

What included in the update?

Improved the SD Card Error message to help resolve troubleshooting issues.
Added a low-pass filter switch option for raw data output mode.
Added a remote command to control the low-pass filter switch.
Fixed the issue where the display mode setting was reset after cycling power.
Fixed that some systems were not appearing in Add Channel mode.
More details

This update should fix a couple of the little bugs that were reported to Uniden. Nothing major in this update.

How to update your HomePatrol?