Scanner Tip: Indoor Antennas

Chances are, if you have a scanner in the house, you have wondered if you need an outside antenna. While an outside antenna will almost always work better than an indoor antenna, sometimes that just isn’t feasible. If you live in a rental property, apartment or condo, or in an HOA restricted area you may not be able or allowed to install an outside antenna. Sometimes you just don’t want to go thru the work to do it. Maybe the spouse or significant other just won’t allow it.

There are alternatives, but as they are also compromises, they may work as well. They may however be good enough to allow you to listen to your targets. Depending on your unique situation, some or all of these ideas may or not work for you. Remember: There is never a guarantee that any of these ideas will ensure that you will be able to monitor your targets.

Let’s start with the simple ideas first. Your new scanner comes with a back of the set (or side of the set for a Home Patrol) antenna. This is usually a metal telescoping rod or a rubber-duck style antenna. Sometimes better reception may be had by a simple relocation or tilting the existing antenna. Maybe move the radio with its antenna closer to a window or away from the large metal objects will help.

The next step would be a better BOS (Back Of Set) antenna. ScannerMaster sells a variety of antennas, from direct replacements (if you lost or broke the one that came with the radio) as well as more advanced antennas. If you mostly monitor 700/800 MHz. systems a specialized antenna for these bands will work better than a general use antenna.

If these don’t help, then you may need a remote inside antenna like the Nomad. The Nomad is a wire antenna and is amplified (active). This allows you to mount the antenna in a better location and leave the radio where you want it.

The next step might be using a base station antenna indoors. ScannerMaster has several of these types. Basically this means a base station antenna with some sort of base to support it along with appropriate coax and connectors. These can be set up on a balcony or behind the drapes for aesthetic purposes.

You can also try a mobile antenna adapted to home use. Try a magnet mount antenna on top of a large metal cabinet, window air conditioner or balcony railing. Window mount antennas can be mounted on an apartment window just like you would on a car. Suction cup mounts work in a home just as well as in a car.

If you have access to an attic then you might try putting a base station antenna there. Try to stay away from large metal objects. If you have metallic shingle liners or solar panels they would likely interfere with your reception.

If you install an antenna outside, either on the roof or a tower, make sure to properly ground the installation to protect from lightening and watch out for electrical wires! Consider having them professionally installed. Use a high quality coax. Usually thicker cables work better at higher frequencies and longer distances. 50 or 75-ohm cable is fine for scanners since you will not be transmitting thru them. We will have a blog post soon all about Coax!

Please follow and like us:
RSS
Follow by Email
Twitter
Visit Us
Follow Me
YOUTUBE
This entry was posted in Antennas, Base Antennas, Indoor Antenna, Scanner 101, Scanner Tip, Scanner Tip of the Day and tagged , , , , , , , , by Rich Carlson. Bookmark the permalink.

About Rich Carlson

June 12, 2015 - Scanner Master is extremely proud to announce that Rich Carlson, past-president of the Chicago Area Radio Monitors Association (CARMA) and one of the nation's leading scanner experts, is now part of our team. Rich recently retired as a Sergeant for the Winnetka, Illinois, Police Department and is now assisting Scanner Master customers in choosing the right scanner for their area, answering technical questions and helping us to develop new products and services. Rich is a highly respected member of the monitoring community who has decades of experience with all types of scanners and communications receivers, antennas, software and accessories. He has a great knowledge of the radio systems that we all monitor as he himself helped to institute and manage many in his time. We couldn't be more excited to have Rich on board. Rich Carlson, N9JIG, has been a railfan since the late 1970's and a radio listener since the 1960's. He has written several scanner guides, including the Scanner Master Illinois Communications Guides. He was a Director of the Chicago Area Radio Monitoring Association, the largest scanner club in the USA and edits the renown CARMA Profiles. He has written several articles for Monitoring Times and other publications. He also owns the Illinois Highways Page at www.n9jig.com. He has a collection of over 25 scanners and dozens of transceivers and specialized receivers. Professionally, he was a Sergeant with an Illinois police department, in was charge of 9-1-1, Communications and Records. He is happily married with a grown son.