Favorite Scanner: RS PRO-2004

Years ago in the mid and late 1980’s police scanners were pretty tame by today’s standards. 20 channels was the norm, 50 channel scanners were top of the line. Most scanners did not cover 800 MHz, the displays were small and hard to view.

Radio Shack surprised the scanning world in 1987 when it introduced the revolutionary PRO-2004 scanner.  Made by GRE (like most RS scanners at the time), it had 300 channels, totally unheard of at the time. People actually complained that there were too many channels available! Soon it was discovered that the memory could be easily expanded to allow 400 channels.

In addition the PRO-2004 had full coverage from 25-520 MHz. and 760-1300 MHz. This was also unheard of at the time. This was one of the first radios that covered the entire spectrum, including Military Air and more. Later versions of the PRO-2004 had the cellular bands removed from the radio.

The radio itself was pretty big and heavy. There was a lot of metal involved, the entire frame and case was made of steel, just the front panel was plastic. The metal case helped reduce outside interference sources. The radio soon developed a reputation for excellent sensitivity and image rejection and it was soon considered the top-of-the-heap scanner.

An entire cottage industry soon developed for modifications to the PRO-2004. It had plenty of room inside for additional boards and components. The radio had a diode matrix used to configure it for different areas and these uses were discovered in short order. Enterprising hobbyists created memory expansion cards. computer interfaces and data decoders to be installed to the radio.

The PRO-2004 spawned 2 successors, the PRO2005 and PRO2006. These were essentially identical to each other with minor updates to the 2006. The 2005/6 were identical in function and features to the 2004 but were in a smaller plastic case (although the interior case was steel).

Almost 30 years on and the PRO-2004/5/6 are still considered among the best scanners ever made. Many are still in daily use. The large channel capacity and wide coverage made them ideal for Military aircraft listening. While current scanners dwarf them in features and capacity the PRO-2004 made a tidal wave sized splash in the scanner hobby. Old-timers maintain fond memories of these scanners.

 

Firmware, Firmware, who needs Firmware?

OK, you have this whiz-bang multi-hundred dollar scanner sitting there and you want to make it much more better! You read about Firmware Updates but haven’t a clue what this means. Should you update the firmware on your scanner? If so how do I do it? What does it all mean? What is the meaning of all this? Can you do this for me?

First, let’s explain WHAT firmware is. Firmware is the operating system of your radio, it works behind the scenes and tells the radio how to deal with things like keyboard inputs, frequencies, etc. Just like your computer or phone has an operating system (Like Windows 10, iOS etc..) scanners do too. Remember, scanners these days are miniature computers, they work much in the same way.

Firmware updates are released for a couple reasons. They either fix a problem or add/change features. Sometimes they do both. As an example, the BCD436HP’s most recent firmware update added the ability to add ProVoice digital, the version before that addressed an issue with clock settings.

When updating firmware one must follow ALL instructions CAREFULLY! You have the possibility of “bricking” your radio if you don’t do it right. This means that your $500 scanner may now be more useful as a brick than a radio… Follow the provided instructions to the letter and make sure that the program and firmware file you use is intended for your radio. The firmware for the PRO106 will not work on the PRO97!

Before trying to update the firmware on your radio make sure you have properly downloaded the firmware file itself as well as the installation program (if needed) BEFORE you start. If you do not have a replacement firmware file to install do not start the process since this erases the existing firmware to make the radio ready for the new version. No new version means no radio once you get going.

Some radios firmware updates are easier than others. The HomePatrol type radios use a program called Sentinel to check for new firmware versions and install them (easy, safe). Other Uniden scanners use a “Bearcat Version Updater” program to install a new update. GRE/RadioShack/Whistler scanners also use an application to install new firmware versions (nerve-wracking maybe).

What they all have in common is that they require a computer running Windows to update. You can use also a Mac as long as you are running Windows on it (with Bootcamp, Parallels, Fusion etc.). You also need the appropriate cable to connect from your computer to the radio. This is usually done via USB but some older radios use a Serial port.

Before updating your firmware make sure you have the following on hand:

  • The radio you want to update
  • The proper cable for your radio, along with the drivers already installed (if needed)
  • The Firmware Updating program appropriate for your radio
  • The actual firmware file itself
  • A strong sedative or plenty of alcohol to calm your nerves (optional)

Follow the instructions included with the firmware update TO THE LETTER. Make sure your radio and the computer can communicate properly. If you have programming software for your radio then read it first and save the programming file just in case you need to restore it to the radio. This also ensures that the radio and computer can communicate.

We also suggest that you check the RadioReference forum for your radio to see what other peoples experiences have been. Reading about someone else’s mistake is a lot easier than trying to fix your own.

Owners of PRO651 and PRO652 scanners that had tried to update their radios’ firmware versions had issues since no firmware updates were available until recently. Now one can download them and install them so previously bricked radios can be reincarnated.

ScannerMaster can update the firmware on many different models of scanners. Download the Hometown Programming Form for your radio and check the Firmware Update option if you would prefer our expert programmers to do this for you. We keep them heavily sedated all of the time already so their nerves are steady. Firmware Updates for “Zip Code Scanners” (HomePatrol, 436/536 and the WS1080/1088/1095/1098 series scanners) is included with the Setup and Optimize package already, it is an extra cost option for other scanners. If you aren’t sure call us and we will let you know.